How to Add Water to a Sunbeam Iron
- 1). Unplug the Sunbeam iron power cord from the electrical outlet. Place a towel on a flat counter and stand the iron so that the front of the iron is pointing up.
- 2). Allow the iron to cool completely before adding water. Turn the "Steam Lever" on the front of the Sunbeam iron to "Dry" and rotate the selector to the "Off" position.
- 3). Grasp the water fill cover on the front of the iron with your thumb and pull it open. Fill a cup with household tap water.
- 4). Pour the water into the fill hole until the water level is at the "Full" mark inside the side of the fill hole.
- 5). Close the fill hole cover until it snaps shut. Plug the power cord back in and resume your ironing.
