RAM Compartment Panel

• 1). Turn off the Solo 2550.
  
  
• 2). Disconnect the power cord and any external devices.
  
  
• 3). Turn the Solo 2550 over.
  
  
• 4). Locate and remove the battery.
  
  
• 5). Locate the RAM compartment panel near the empty battery port.
  
  
• 6). Remove the screw from the RAM compartment panel. Lift the panel to open the underside of the laptop.
  
  

Hinge Cover

• 1). Turn off the Solo 2550.
  
  
• 2). Disconnect the power cord and any external devices.
  
  
• 3). Turn the Solo 2550 over and remove the battery.
  
  
• 4). Remove the two screws now visible in the empty battery port.
  
  
• 5). Turn the 2550 over and open the display.
  
  
• 6). Wedge a flathead screwdriver into the hinge cover between the keyboard and the display at the top of the computer.
  
  
• 7). Pry gently until the hinge cover is loose.
  
  
• 8). Remove the hinge cover and set it aside.
  
  
• 9). Remove the two screws now visible beneath the hinge cover.
  
  
• 10
  
  Pry the edge of the keyboard up with the flathead screwdriver.
  
  
• 11
  
  Pull the keyboard up and rotate it 180 degrees until it rests on the touch pad and the Solo 2550 is open.