Things You'll Need

Instructions

1

Take measurements of one of the clergy robes if possible. Measure the length of the robe, the width at the base, the chest, the shoulders, and the length of the arms. For decorations or other items that have to be placed in a certain place, measure the space from the shoulders to mark that on the pattern.
2

Buy a dress or costume pattern that matches the general shape of the robe; often a two-piece royalty costume works well for this. You'll change it later, so focus on the overall shape.
3

Lay out butcher paper and pin it down if it rolls up. Cut out the basics of the pattern to its largest size (the outer printed line for each piece). Since most clergy robes are made from two pieces of continuous cloth for the front and back, pin together separate pieces to make a single front and back. Measure the pattern now and trim if necessary.
4

Trace the outside of the front and back pieces, and the arms. For robes that require a neck piece, draw a rectangle of the correct length and taper the ends if necessary.
5

Cut out the pattern. Measure it against the clergy robe if possible; it should be an inch or two outside the edges of a completed robe. Mark any decorations or other notes on the pattern for later reference.