Adjust in Small Increments

• 1). Put the bow in a bow press or relax your strings by backing out the limb bolts.
  
  
• 2). Move the string to the minus "-" post. This will decrease the draw length by a half inch.
  
  
• 3). Move the string to the plus "+" post. This will increase the draw length by a half inch.
  
  

Adjust by 1-inch Increments

• 1). Place bow in a bow press or relax the stings.
  
  
• 2). Remove the axle from the limbs.
  
  
• 3). Remove the cam.
  
  
• 4). Remove the three-socket head-cap screws that hold the module in place.
  
  
• 5). Remove the draw stop and place it in the slot that correlates with the new module size.
  
  
• 6). Put the new module in place, aligning the larger and small pins.
  
  
• 7). Place the three screws back on the module.
  
  
• 8). Reassemble the bow and tighten the strings.