Building with Cedar

• 1). Design your cedar wood projects making proper allowances for shrinkage, expansion and contraction. Allowing for a slightly thicker stock of cedar will provide the needed strength to overcome the softer wood characteristics.
  
  
• 2). Determine the grade of cedar lumber that is appropriate for your project. According to the Western Red Cedar Lumber Association, there are specific uses of different grades of Cedar.
  
  
• 3). Pre-drill all holes for fasteners that will carry any significant loads. Pre-drilling the holes for the fasteners will create uniform round holes that distribute the loads where pieces are joined together.
  
  
• 4). Use nuts and bolts with washers to hold components together. The compressive action of a nut and bolt compared to using a wood screw add the holding power required to overcome the significant expansion and contraction of cedar.
  
  
• 5). Use high grade wood glue along with the nut and bolts at all joints. Most high grade wood glues actually penetrate into the surface of the wood and it is this action that helps to counteract the soft wood characteristics of rapid expansion and contraction.