How to Draw ICP Clown Faces
- 1). Form the left cheekbone by drawing a short line segment at about a 45 degree angle up and right, from the top left point of the triangle. From that segment's endpoint, draw another segment down and right, so that it runs roughly parallel with the triangle's left side. Make this segment slightly longer than this step's first segment.
- 2). Form the right cheekbone as a mirror image of the left one. Observe closely the angles and lengths you drew in Step 1.
- 3). Form the left eye socket between these two points:
Point 1: same height as cheekbone top, and midway from left cheekbone top and vertical center of face
Point 2: same height as the bottom point of Step 2's second segment; and just left of the face's vertical center. - 4). Create the right eye as a mirror image of the left.
- 5). Form the outer mouth bottom: Draw a curve that runs roughly parallel to the triangle's left and right sides. Leave only a small space between the new line and the triangle sides.
- 6). Form the outer mouth top: Draw a curve that begins at the upper left of the mouth and moves right and slightly downward until you reach the face's vertical center. Mirror this curve on the face's right side.
- 7). Form the inner mouth with a small downward pointing triangle, inside the outer mouth you've already drawn. Fill in this triangle to complete the inner, actual mouth.
- 8). Draw the nose as a slightly flattened oval at the vertical center of the face, just above the outer mouth.
- 9). Form the hat's brim: Draw a hot dog shape that bows downward slightly and rests across the left and right cheekbones. The hot dog's length is equal to the distance between the cheekbones.
- 10
Form the hat's top as two side-by-side semicircles that sit atop the hat's brim. Use the top half of the circle, and size the circle diameters about half the height of the original rectangle. - 11
Complete the hat by drawing two curves: The first flows up and right from the left semi-circle, and reaches a little beyond the right edge of the right circle; the second curve swirls up from the bottom right point of the right semi-circle, to join with the first curve. - 12
Color the completed face and hat top green, and color the hat brim scarlet.
