Frosted Window Film: Stylish DIY Answer for Home Privacy
Whether you would like more privacy, to reduce harmful UV rays, or would just like to brighten up a room, frosted window film [http://www.decowindowfilms.com/frosted-glass-window-film.html] may be the answer you've been looking for. Many of the top window films today are adhesive free, easy to install, and can even be removed and reused elsewhere in your home. They also decrease glare and keep 95% of harmful ultraviolet light from passing through your windows and glass doors. Deco window films are available in a variety of sizes and can easily be cut in order to fully customize them for your windows and doors. Regardless of your style, there is a window film to meet your needs.
Adding window films to your home is an easy DIY afternoon project that will give you more bang for your buck. Window films cost much less than having custom stained glass, frosted, or tinted windows installed and, best of all, window film installation [http://www.decowindowfilms.com/stained-abstract-and-geometric-designs.html] can be done in under an hour with minimal tools and no mess to clean up afterwards.
Steps for DIY Window Film Installation
Clean your windows thoroughly. If they have a lot of dirt, dust, or build-up, start with soap and water to remove the grime. Then, a quick pass with a window cleaner, and they should be ready for your decorative window film.
Measure your windows and trace the size onto the backing paper of your window film. Cut off any excess with scissors or a utility knife.
Spray your windows with soapy water, ensuring that the glass surfaces are completely wet.
Remove the paper backing for your films and apply them to the wet windows, sliding them into place and smoothing them out with your hands.
Start at the center of each film and press out any bubbles with a squeegee.
Depending on the brand and quality of the window film, they generally last for many years and are removable and transferable to other windows/surfaces.
Adding window films to your home is an easy DIY afternoon project that will give you more bang for your buck. Window films cost much less than having custom stained glass, frosted, or tinted windows installed and, best of all, window film installation [http://www.decowindowfilms.com/stained-abstract-and-geometric-designs.html] can be done in under an hour with minimal tools and no mess to clean up afterwards.
Steps for DIY Window Film Installation
Clean your windows thoroughly. If they have a lot of dirt, dust, or build-up, start with soap and water to remove the grime. Then, a quick pass with a window cleaner, and they should be ready for your decorative window film.
Measure your windows and trace the size onto the backing paper of your window film. Cut off any excess with scissors or a utility knife.
Spray your windows with soapy water, ensuring that the glass surfaces are completely wet.
Remove the paper backing for your films and apply them to the wet windows, sliding them into place and smoothing them out with your hands.
Start at the center of each film and press out any bubbles with a squeegee.
Depending on the brand and quality of the window film, they generally last for many years and are removable and transferable to other windows/surfaces.
