Vinyl Body Decal Instructions

1). Wash the outside of the vehicle thoroughly using soap and water. Dry the car with microfiber towels.
2). Hold your decal up to the area on the vehicle where you want to apply it, but with the backing paper still on the decal. Make sure the decal will fit without problems.
3). Spray down the area where you will apply the decal. Lay the decal face down, remove the backing paper and spray the backside of the decal.
4). Apply the decal to the vehicle's body, making sure to not wrinkle it. Slide the decal across the body until you have it exactly as you want it.
5). Start at the center of the decal and use the squeegee to push out air bubbles under the decal. Spray the decal again once you have removed all the bubbles.
6). Allow the decal to dry for one hour and then peel off the protective top layer. Use a utility knife to trim the decal at doors, windows, etc.